General Engineer

Summary

This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Domestic Industrial Base (DIB) & Major Range & Test Facilities Base (MRTFB) in DoD to recruit and appoint qualified candidates to positions in the competitive service.

Duties

• Develop and maintain installation planning documents, project concepts, and preliminary design documents for the installation Master Plan.
• Provide technical support in matters relating to long range planning, military construction plans and policies in matters related to developing, administering and controlling the overall installation facility utilization and construction programs.
• Responsible for the civil, mechanical, electrical, and architectural engineering coordination aspects between contractors, Corps of Engineers, and intstallation elements.
• Conducts and/or coordinates engineering studies and analyses in preparation of resolutions for design and construction deficiencies.
• Perform project management duties related to Military Construction Army (MCA) projects; Sustainment, Restoration, and Modernization (SRM) projects.

Qualifications

Who May Apply: US Citizens In order to qualify, you must meet the education and/or requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. ****** This is an open continuous vacancy announcement. 1st cut-off will be September 15, 2026. Applicants will be referred as needed. Final application disposition will be completed once all positions have been filled or the announcement reaches the end of the open period stated in the announcement. ****** Basic Requirement for General Engineer: A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: Specialized Experience: One year of specialized experience which includes: prepare engineering plans, designs, specifications, and/or related documentation to complete construction projects; formulate recommendations or solutions to modify existing practices and procedures; review, coordinate, and monitor technical aspects of projects. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11).

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/

How to apply

To apply for this position, you must complete the online questionnaire and submit the documentation specified in the Required Documents section above. The complete application package must be submitted by 11:59 PM (EST) on 09/07/2027 to receive consideration Follow the prompts to select your resume and/or other supporting documents to be included with your application package. As a reminder, your resume must be two pages or less and must support the specialized experience described in this announcement. Resumes exceeding two pages will be removed from consideration. For additional information, refer to the 'Required Documents' section. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process. After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process. You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. Your resume selected in USAJOBS will be included, but you must re-select other documents from your USAJOBS account or your application may be incomplete. It is your responsibility to verify that your application package (resume, supporting documents, and responses to the questionnaire) is complete, accurate, and submitted by the closing date. Uploaded documents may take up to one hour to clear the virus scan. Additional information on how to complete the online application process and submit your online application may be found on the USA Staffing Applicant Resource Center. To verify the status of your application, log into your USAJOBS account (https://www.usajobs.gov/applicant/profile/dashboard/), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://help.usajobs.gov/how-to/application/status.