Civil Engineer

Summary

This position is a Civil Engineer, GS- 0810-7/9 working in Yuma, Arizona for the LCB 3401 - Lower Colorado Basin- YAO. To be considered you must currently reside within 75 miles of Yuma, AZ.

Duties

• Some of the major duties you will perform include but are not limited to the following: Engineering Analysis: Performs conventional and routine engineering analyses assignments associated with technical planning activities; data collection; modeling and data analyses; analyses of site location and/or conditions; risk estimation and analyses; or analyses of instrumentation data. Design: Completes conventional and routine engineering designs. Documentation and Presentation: Drafts technical documentation for conventional or routine engineering assignments or for assigned portions of complex projects. Investigations, Assessments, and/or Inspections: Participates in civil engineering facility examinations, reviews, and/or inspections which include conducting condition assessments and construction and transfer inspections; identifying deficiencies relative to design criteria, applicable codes and standards, or state or Federal statutes or regulations; calculating preliminary estimates for repairs; documenting results; identifying future needs for the asset investment such as extraordinary maintenance and rehabilitation; and project management planning. Duties will be developmental in nature when filled below the full performance level.

Qualifications

All qualifications must be met by the closing date of this announcement-09/21/2026-unless otherwise stated in this vacancy announcement. All candidates must also meet Time-in-Grade requirements. To receive credit for experience, your resume MUST state either "full-time" (or "40 hours a week") or "part-time" with the number of hours worked per week to ensure proper crediting of specialized experience. Failure to adequately provide information needed to determine number of hours worked in each position may result in that time not being credited when evaluating qualifying experience. For periods of time that reflect military service, the DD-214 or Statement of Service is sufficient to meet the full and/or part-time hours requirement as the service dates will be reflected. In order to qualify for this position you must possess both the Basic Requirement and Minimum Qualification. Basic Requirement: Basic Requirements: Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:-- Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.- Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.- Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.- Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.) In addition to meeting the educational requirements above, your resume must clearly reflect ALL of the experience (or education for the GS-11) listed below. You must be clear and concise in describing your experience - HR will not make assumptions. GS-07: To qualify for the GS-07, your resume must reflect one year of professional experience performing all of the following duties: Planning, scheduling, coordinating and conducting engineering facility examinations, reviews, and/or inspections which include conducting condition assessments and transfer inspections Identifying future needs for the asset investment, such as extraordinary maintenance and rehabilitation, and project management planning Experience supporting the implementation and administration of a variety of assigned contracts, including construction contracts, service contracts, and interagency agreements OR You could otherwise qualify on the basis of Education having successfully completed 1 full year of graduate level education OR Superior Academic Achievement in undergraduate studies OR have Completed of a 5-year program of study of at least 160 semester hours leading to a bachelor's degree in engineering or have A combination of education and specialized experience listed above totaling at least 100%. The superior academic achievement provision is to be used to determine eligibility for applicable GS-07 level positions of persons who have completed (or expect to complete within 9 months) all the requirements for bachelor's degree from an accredited college or university with a qualifying grade point average (GPA), class standing, or honors society. For more information, visit OPM. GS-09: To qualify for the GS-09, your resume must reflect one year of professional experience performing all of the following duties: Conducting engineering analyses in the areas of construction management, geotechnical, highway, hydraulics, hydrologic, or structural engineering; Creating and/or completing engineering designs; Drafting technical documentation of engineering assignments; Performing project management to include contract administration, compliance and/or database operation OR You could otherwise qualify on the basis of Education having successfully completed 2 years of progressively higher-level graduate education leading to a master's degree or master's or equivalent graduate degree. This education must demonstrate the knowledge, skills, and abilities necessary to do the work of this position.

Requirements

You must be a U.S. Citizen or U.S. National. You must be suitable for federal employment, determined by a background investigation. You must submit a resume and supporting documentation (see Required Documents). You must meet any minimum education and/or experience requirements (see Qualifications). You must submit transcript(s) to verify education requirements (see Qualifications/Education). Males born after 12-31-59 must be registered for Selective Service. Direct Deposit participation required. Must have and maintain a valid driver's license throughout employment. You must submit ALL required documents and a completed questionnaire. You must currently reside within 75 miles of Yuma, AZ; proof of residency required at time of application. Continue to Additional Information section for the Condition of Employment for Probationary Period.

Education

This position has a mandatory education requirement. You must submit a copy of college transcript(s) (unofficial copy is acceptable) to support claimed education if substituting education for experience. Transcripts must include the name of the college or university and date the degree was conferred. Non-submission will result in being rated not-qualified for the position. You will be required to provide official college transcripts to verify educational qualifications, if selected. An official transcript must be sent directly from the University's Registrar's office and must be provided from the institution awarding the degree. Academic transcripts certified by notary publics are NOT official. Official transcripts must be submitted prior to reporting to work as a condition of employment. Failure to submit official transcripts may be grounds for dismissal or rescission of the job offer. Accreditation: Only education from an accredited college or university recognized by the Department of Education is acceptable to meet education requirements or to substitute for experience, if applicable. For additional info, refer to the Office of Personnel Management and U.S. Department of Education. Foreign Education: To receive credit for education completed outside the United States, you must show proof that the education has been submitted to a private organization that specializes in interpretation of foreign educational credentials and such education has been deemed at least equivalent to that gained in conventional U.S. education programs. Recognition of Foreign Qualifications | U.S. Department of Education. https://www.ed.gov/about/initiatives/international-affairs/recognition-of-foreign-qualification

How to apply

To apply for this position, you must submit the documentation specified in the Required Documents section. To receive consideration, your complete application package must be submitted by 11:59 PM (ET) on 09/21/2026-unless otherwise stated in this vacancy announcement to receive consideration. You must provide documentation to support your eligibility and qualification claims. Please review the required documentation listed in the eligibility sections to ensure you submit the appropriate information. You will only be considered for eligibilities for which you have provided the required supporting documentation. Applications may be submitted through USAJOBS or through other authorized methods identified by the agency (e.g., third-party platforms or local outreach efforts) to support targeted recruitment under this authority. Applicants submitting materials outside of USAJOBS must: Submit a complete application package by the 09/21/2026 of this announcement, and Ensure all materials are formatted and consistent with the application instructions outlined in this announcement, including resume requirements and supporting documentation. All applications, regardless of submission method, will be evaluated using the same criteria and requirements to ensure a fair and equitable hiring process. Applications received after the closing date, or that do not meet the requirements outlined in this announcement, will not be considered. USAJOBS Application Instructions Select Apply. If you are not logged in, you will be prompted to login or create an account. Prompted to Start the Application Process by selecting "Start Application." Click here for USAJobs Help with "How to create an application" To PREVIEW the application questionnaire, select the following link: https://apply.usastaffing.gov/ViewQuestionnaire/13041618 Select or add the resume you want to use for this application. Click here on how to build a resume in USAJOBS. Select documents you want included in this application. Review package to acknowledge your documents were reviewed. Select if you want to include your demographic information. After reading and certifying the application is true and submitted in good faith, select "Continue to Agency Site." Follow onscreen prompts and instructions to complete your application. Add the supporting documents by indexing your documents with the dropdown. Upload any missing required documents or optional documents. Review and Submit Application. While logged in, you can check the status of your application by selecting "+" next to the job title for this position. You can review or revise your application at any point during the open period of the announcement. To update an application, you should log into your USAJOBS account and select "+" next to the job title for this position. Select "Update Application" for this job. Note: When you click Update Application, you will be prompted to re-select your documents from USAJOBS. Documents submitted with the first application will no longer be associated with the applicant record. So it is important that you select all documents you want to use in the re-application.