DISTINGUISHED SCIENTIST/ENGINEER FOR NAVY THREAT ENGINEERING (SSTM)

Summary

You will serve as a Distinguished Engineer/Scientist for Navy Threat Engineering for the Naval Surface Warfare Center Dahlgren Division (NSWCDD).

Duties

• You will be responsible for identifying critical threat and target initiatives to support Fleet and technology and research and development needs in this domain.
• You will lead the development of the Naval competency and technical authority for Threat Engineering.
• You will provide the authoritative and foundational threat models and descriptions to anchor much of NSWC Dahlgren Division's Science and Technology and Research and Development portfolio.
• You will oversee the execution of Threat Engineering work that supports the Science and Technology, Research, Development, Test, and Evaluation, and Acquisition efforts.
• You will lead the development of threat modeling solutions to allow Naval forces to develop/test with fully informed threat representation/information.

Qualifications

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Candidates will not be hired based on their race, sex, color, religion, or national origin. To meet the minimum qualification requirements for this position, your resume must show that you possess the Technical Qualifications (TQ) related to this position - NOT TO EXCEED 2 PAGES. Resumes over the 2-page limit will be disqualified. Your resume should include examples of experience, education, and accomplishments applicable to the qualification(s). If your resume does not reflect demonstrated evidence of these qualifications, you may not receive consideration for the position. TECHNICAL QUALIFICATIONS (TQs): Your resume should demonstrate accomplishments that would satisfy the technical qualifications: TQ 1- Demonstrated expert knowledge and hands-on experience in threat engineering and complex modeling and simulation efforts, with a proven ability to develop robust threat models, navigate substantial uncertainty, and ensure all model outputs are strictly fit for purpose. TQ 2- Demonstrated success in building high-performing teams, developing personnel, and forging strategic coalitions across agency and sub-agency levels to integrate threat modeling and engineering throughout intelligence, acquisition, and engineering pipelines. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=GS-PROF AND Professional Engineering Positions, 0800 General Physical Science Series, 1301 Operations Research Series 1515 Mathematics Series 1520 Computer Science Series 1550 Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Applicants must meet the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: For 0801 Professional Engineering Series: A. Degree: Engineering. Successful completion of a bachelor's or higher engineering degree from an accredited college or university. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position. -or- B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: (I) Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions; or (II) Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico; or (III) Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A; or (IV) Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.) For 1301 General Physical Science Series: Degree: physical science, engineering, or mathematics that included 24 semester hours in physical science and/or related engineering science such as mechanics, dynamics, properties of materials, and electronics. -or- Combination of education and experience -- education equivalent to one of the majors shown in A above that included at least 24 semester hours in physical science and/or related engineering science, plus appropriate experience or additional education. For 1515 Operations Research Series: Degree: in operations research; or at least 24 semester hours in a combination of operations research, mathematics, probability, statistics, mathematical logic, science, or subject-matter courses requiring substantial competence in college-level mathematics or statistics. At least 3 of the 24 semester hours must have been in calculus. For 1520 Mathematics Series: A. Degree: mathematics; or the equivalent of a major that included at least 24 semester hours in mathematics. -or- B. Combination of education and experience -- courses equivalent to a major in mathematics (including at least 24 semester hours in mathematics), as shown in A above, plus appropriate experience or additional education. For 1550 Computer Science Series: Bachelor's degree in computer science or bachelor's degree with 30 semester hours in a combination of mathematics, statistics, and computer science. At least 15 of the 30 semester hours must have included any combination of statistics and mathematics that included differential and integral calculus. All academic degrees and course work must be from accredited or pre-accredited institutions. An advanced degree of Master's or Ph.D. in one of the educational fields listed above is highly desirable.

How to apply

Click the Apply Online button to create an account or log in to your existing USAJOBS account. To apply for this position, you must provide a complete Application Package which includes: 1. Complete resume. Your resume must show relevant experience, job title, duties and accomplishments. Your resume must show complete information for each job entry to support minimum qualifications. The following information should be provided in your resume, but it is acceptable to provide elsewhere in your application package: employer's name, starting and end dates (Mo/Yr), hours per week, and pay plan, series and grade level (e.g. GS-0201-09) for relevant federal experience. TIP: A good way to ensure you include all essential information is to use the Resume Builder in USAJOBS to create your resume. 2. Complete assessment questionnaire. For a quick preview of the assessment questionnaire click here: https://apply.usastaffing.gov/ViewQuestionnaire/13035702 3. Documentation that supports all of the claims made in your resume and assessment questionnaire Failure to submit a complete application package will result in an ineligible rating and loss of consideration. Your complete application (resume, assessment questionnaire, and all supporting documents) must be received by 11:59 pm Eastern Standard Time (EST) on 09/08/2026to receive consideration. Applications received after 11:59 pm Eastern Standard Time (EST) on 09/08/2026 will generally not be accepted. If more than one resume is received, only the last resume received and processed will be reviewed. Please do not submit multiple resumes. NOTE: To check the status of your application or return to a previous or incomplete application, log into your USAJOBS account: https://mydon.usajobs.gov/Account/Login select Application Status, and click on the more information link under the application status for this position. Your uploaded documents may take several hours to clear the virus scan process so please plan appropriately. You are encouraged to apply online. Applying online will allow you to review and track the status of your application. Do not email or send hard copy resumes/applications to the Contact Information or Agency Information listed in this vacancy announcement. All resumes/applications received at the addresses listed in the Contact Information or Agency Information will be destroyed and will not be considered for this vacancy announcement. It is the applicant's responsibility to verify that all information in their resume, assessment questionnaire, and supporting documents are legible and accurate. Human Resources will not modify a resume or change an applicant's answer to a question, even upon request.