Civil Engineer

Summary

This position serves as a regional office senior Civil Engineer and lead project engineer for the Office of Airports (ARP), New York Airports District Office in the Eastern Region, in support of the Airport Improvement Program (AIP). Serves as the principal Federal Aviation Administration (FAA) organization responsible for all airport program matters in airport design, construction, maintenance, operations and safety.

Duties

• Serve as regional point of contact, authoritative consultant, and technical expert for airport engineering. Serve as subject matter expert on airport engineering, construction and design standards, and pavement design to assure currency and compliance of Regulations, Orders, etc. within assigned programs. Conduct workshops/training for Airports employees, sponsors and consultants on paving, design, and development issues related to the Airport Improvement Program. Serve as the regional expert for plans and specification reviews, compliance with FAA technical standards, and bidding and award concerns. Represent management at high level technical meetings. Interpret, communicate, promote awareness and prepare briefings on new FAA Airports initiatives and statutory programs, and draft and newly approved policy and guidance. Optional Duty: Serve as the Regional Safety Management System (SMS) program manager and as the focal point for addressing safety and standards issues. Serve as focal point for auditors from oversight agencies including the Office of Inspector General (OIG), Government Accountability Office (GAO) and others. Represent the office at runway safety meetings and make recommendations to management regarding funding allocations for any recommended runway safety projects. Analyze and evaluate status/project closeout reports, findings, and recommendations from subordinate staff for technical compliance and alignment with project requirements, and in collaboration and/or negotiation with airport sponsors resolve areas of conflict. Review/coordinate with management Modification to Standards (MODs) request and forwards recommendation to FAA Headquarters for approval. Evaluate and provide consolidated comments on draft policy. Oversee the review and processing of aeronautical studies. Coordinate with other FAA divisions regarding reimbursable agreements and projects that may affect an FAA facility or operation. Provide technical direction, advice and guidance to all Civil Engineers/Program Managers. Collaborate with Federal, State and local officials, airport sponsor staff, consultants, airlines, FAA offices and other user groups to ensure development projects meet FAA regulations, standards and guidance. Manage complex projects and is assigned work in support of engineering projects. Evaluate technical processes, to include recommending and updating Regional technical guidance. Evaluate comments on engineering design drawings, specifications, construction safety, and phasing plans for compliance with established requirements. Visit airports and current and proposed construction sites to observe construction progress and perform construction inspections Determine solutions to problems encountered. Ensure acceptable levels of safety are provided and if necessary, provide guidance and professional assistance to bring an airport to standards. Reviews and prepares correspondence for review by management including Congressional responses, briefing papers, approval letters and guidance to sponsors associated with all aspects of airport development. Performs other duties as assigned.

Qualifications

Specialized experience is experience which is in or directly related to the line of work of the position to be filled and has equipped the applicant with the particular knowledge, skills and abilities to successfully perform the duties of the position. To be creditable, specialized experience must be at least equivalent to the next lower grade or band level in the normal line of progression for the occupation in the organization. To qualify for this position at the FV-J level, you must demonstrate in your application that you possess at least one year of specialized experience equivalent to FV-I, FG/GS-13 level. Specialized experience is experience that has equipped you with the particular knowledge, skills, and abilities to successfully perform the duties of the position and that is typically in or related to work of the position to be filled. Examples of specialized experience for this position include: 1) Experience in negotiating resolution on complex and/or controversial issues. 2) Experience in airport design, pavement, and construction standards. 3) Experience conducting technical training seminars and workshops. 4) Experience providing technical guidance to staff and representing management at high level technical meetings. As a part of the Federal-Wide Hiring Reform Initiative (streamlining the hiring process), the FAA is committed to eliminating the use of the Knowledge, Skills and Ability (KSA) narratives from the application in the hiring process for all announcements. Therefore, as an applicant for this announcement, you are NOT required to provide a narrative response in the text box listed below each KSA. In lieu of providing a KSA narrative response in the text box listed below each KSA, in your work history, please include information that provides specific examples of how you meet the response level or answer you chose for each KSA. Your work history examples should be specific and clearly reflect the highest level of ability. Your KSA answers will be evaluated further to validate whether the level that you selected is appropriate based on the work history and experience you provided. Your answers may be adjusted by a Human Resource Specialist as appropriate. Eligible applicants meeting the minimum qualification requirements and selective factor(s) if applicable, may be further evaluated on the Knowledge, Skills and Abilities (KSA) listed in the announcement. Based on this evaluation, applicants will be placed in one of the following categories: score order, category grouping, or alphabetical and referred to the selecting official for consideration. In addition to the minimum qualifications, the following has been determined to be a selective factor for this position. This means possession of this criterion is part of the minimum qualifications and is essential to perform the duties and responsibilities of this position. Applicants who do not possess this criterion are ineligible for further consideration. Demonstrated experience in airport design, construction standards and methods.

Requirements

We are not accepting applications from noncitizens.

Education

This position has a positive education requirement: Applicants must submit a copy of their college or university transcripts(s) and certificates by the closing date of announcement to verify qualifications. If selected, an official transcript will be required prior to appointment. You may upload these documents with your application in USAJOBS or fax it to fax number provided in the announcement (please include announcement number on each page). Failure to do so will result in loss of consideration. Schools must be accredited by an accrediting institution recognized by the U.S. Department of Education. Accreditation may be verified at the following website: www.ed.gov/accreditation. Foreign education must be evaluated by a private professional organization specializing in interpretation of foreign education credentials or an accredited U.S. educational institution in terms of equivalence to a degree acquired at an American college or university. A copy of the evaluation results must be included, otherwise your foreign education will not be considered. In addition to meeting the specialized experience above, to qualify for this position you must also meet one of the educational requirements listed below: Basic Requirements for a Civil Engineer, FV-0810: A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses(more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics; OR, B. Combination of education and experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.) Note: An applicant who meets the basic requirements as specified in A or B above, except as noted under B.1., may qualify for positions in any branch of engineering unless selective factors indicate otherwise. Make sure your Resume includes detailed information to support your qualifications and answers to the job questionnaire.

How to apply

Applicants may be required to complete one or multiple assessments as part of the evaluation process. This assessment aims to evaluate the competencies and qualifications essential for the position. You must apply online to receive consideration. Your application must be submitted by 11:59 PM Eastern Time on the Close Date for it to be accepted. If you are applying for positions associated with FAA registers, your application must be submitted at the time a referral list is created in order to receive consideration for positions associated with a register. RESUMES ARE LIMITED TO TWO PAGES. IN DESCRIBING YOUR WORK EXPERIENCE AND/OR EDUCATION, PLEASE BE CLEAR AND SPECIFIC AND INCLUDE INFORMATION AS IT RELATES TO THE QUALIFICATIONS AND SPECIALIZED EXPERIENCE REQUIREMENTS OF THIS POSITION. Please ensure EACH work history includes ALL of the following information: Job Title (include series and grade if Federal Job) Relevant work experience: should align to the Job Announcement and address all required qualifications and include job title, employer name, start/end dates, number of hours worked per week. Education, certification or licensure: If required, education should include school/institution name, completion date, degree type and GPA. Determining length of General or Specialized Experience is dependent on the above information and failure to provide ALL of this information may result in a finding of ineligible. You may upload completed documents to your USAJOBS Account. This will provide you the opportunity to utilize the uploaded information again when applying for future vacancies.