ELECTRONIC INTEGRATED SYSTEMS MECHANIC

Summary

This ELECTRONIC INTEGRATED SYSTEMS MECHANIC position, within an Air National Guard Aviation Wing, Maintenance Group, Aircraft Maintenance Squadron, Avionics Element, Avionics Shop, Communications/Navigation/ECM, or Guidance and Control shop and is part of the CA 146 AW.

Duties

• THIS IS A T32 EXCEPTED SERVICE, PERMANENT POSITION. The primary purpose of the ELECTRONIC INTEGRATED SYSTEMS MECHANIC, WG-2610-12/13, is to install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes consisting of multiple completely integrated electronic avionics systems where the complex accomplishes a number of major functions. The worker in this career field must demonstrate the ability to perform on- or off-equipment maintenance on one or more complete electronic integrated systems associated with the assigned aircraft and/or maintenance on automatic flight control systems, instrument systems, inertial and radar navigation systems. May make additional selections within 90 days of eligible(s) issuance.

Qualifications

General Experience: Possess experience, education or training which provides the ability to install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes. ELECTRONIC INTEGRATED SYSTEMS MECHANIC, WG-2610-12 (Training Grade): Must have at least 18 months of experience performing on-or-off equipment maintenance on one or more complete electronic integrated systems associated with the assigned aircraft and/or maintenance on automatic flight control systems, instrument systems, inertial or radar navigation systems; Experience performing scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems; Experience conducting operational checks, inspections, tests, trouble shooting, removal and replacement of line replaceable units; Experience solving complex problems by analyzing installation, circuitry, and operating characteristics of the systems; Experience adjusting and aligning system sensors, transmitters, amplifiers, power supplies, display devices, controls, transponders, actuators, servos, computers and other related components. ELECTRONIC INTEGRATED SYSTEMS MECHANIC, WG-2610-13: Must have at least at least 12 months of specialized experiences working as an Electronic Integrated Systems Mechanic, WG-2610-12 and have at least18 months of specialized experience reviewing and analyzing maintenance data; Experience determining if criteria is sufficient to provide adequate test, troubleshooting and repair procedures; Experience devising and recommending tests, procedural changes, or data corrections; Experience monitoring the operations of complex, inter-related systems, analyzing operating trends, and proposing preventative maintenance down time; Experience performing alignments, adjustments, and conducting final calibrations on integrated systems to determine successful repairs.??????? TRAINEE POSITION: Applicants not meeting full qualifications for the WG-12 position indicated above may be considered for WG-13 trainee, if qualified. Statement-of-Difference of qualification requirements for each are indicated. If appointed as trainee, the selectee may be non-competitively promoted to WG-13 upon meeting full qualifications and recommendations of supervisor. Your qualifications will be evaluated on the following competencies: Knowledge of Equipment Assembly, Installation, Repair, etc. Technical Documentation Theory of Electronics Trouble shooting (Electronic Equipment)

Requirements

CALIFORNIA NATIONAL GUARD MEMBERSHIP IS REQUIRED: This is an excepted service position that requires membership in the California National Guard. Selectee will be required to wear the military uniform. Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment. If you are interested in joining the California National Guard, please contact a California National Guard recruiter prior to applying for this position. https://ca.nationalguard.com/california Compatible Military Assignment and Grade are required. Military technicians must be assigned to a military position in the same unit which they are employed or, in a unit that is supported by the employing activity. Military technicians must hold the military grade specified for the position. WG-12: 2A051, 2A251, 2A252, 2A253, 2A354, 2A355, 2A851, 2A852, 2A951, 2A952, 2A953, 2A954. WG-13: 2A071, 2A271, 2A272, 2A273, 2A374, 2A375, 2A871, 2A872, 2A971, 2A972, 2A973, 2A974. Non-PAFSC/DAFSC applicants are encouraged to apply for the positions if experience is held, however must become compatible before appointment. Priority Areas(s) of Consideration: Priority consideration is first given to the areas below. AREA I= Current California National Guard employees who are serving on a Permanent/Indefinite/Temporary appointment. AREA II= Current California National Guard members. AREA III= Current military members of the Air Force/Army National Guard, Air Force/Army Reserve or Air Force/Army Active Duty. (Applicants who are currently in other Air/Army branches and NOT currently a member of the California National Guard (CNG) must become a member of a compatible unit of assignment within the Air Force CNG commensurate with the military grade listed in this announcement prior to federal assignment). Military Grades: E-3 through E-6 Recruitment/Relocation Recruitment/Relocation Incentive IS NOT authorized. PCS Relocation Costs IS NOT authorized based on determination that Permanent Change of Station (PCS) move is not in the Government best interest. Must maintain appropriate level of security clearance. May be required to successfully complete a one or two year trial period. Must wear appropriate military uniform including required grooming standards. Must maintain a compatible military unit, grade and job assignment as required by current directives. Participation in direct deposit is mandatory.

Education

N/A

How to apply

To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section above. A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. No changes to the application may be made after the close date of the announcement. To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application. Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process. After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process. You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.