POWERED SUPPORT SYSTEMS MECHANIC (Title 32)

Summary

THIS IS A TITLE 32 DUAL STATUS POSITION DUTY LOCATION: Army Aviation Support Facility (AASF), Windsor Locks, CT AREA(S) OF CONSIDERATION: Area 1: All currently employed full-time permanent and indefinite personnel of the CTARNG. Area 2: All currently employed full-time Temporary Technician personnel (Tenure 0) and all current traditional members of the CTARNG.

Duties

• This is an indefinite position that may convert to permanent without further competition. JOB SUMMARY: The primary purpose for the position is to perform duties involving the maintenance and repair of power ground and other support equipment used in aircraft servicing and repairs. NATIONAL GUARD MEMBERSHIP IS REQUIRED. This is an excepted position that requires membership in a compatible military assignment in the Connecticut Army National Guard. The major duties include, but are not limited to: Responsible for the Ground Support Equipment maintenance program, inventory control, and the identification and scheduling of preventive maintenance requirements for ground support equipment. Performs required preventive maintenance and servicing of equipment including repairing and replacing tires, lubrication, oil changes, replacing air, fuel and oil filters, checking fluid levels; and adjusting or replacing ignition parts, hoses, v-belts, and other items. Performs major system component overhaul/rebuild, repair/replacement and troubleshooting as needed, to include but not limited to, power-plant systems, brake systems, steering systems, hydraulic systems, diesel and gas systems, air systems, starting systems, ignition systems and electrical systems in addition to the following components, power-plant, brake, fuel, steering, hydraulic, air, starting, ignition and electrical system. Troubleshoots deficiencies and repairs flight critical equipment including lifting devices, turbine powered generators, towing devices and auxiliary power units. Trouble-shoots equipment and determines the extent of repairs as well as the parts required. WORKING CONDITIONS: Works indoors and outdoors, in inclement weather, on icy, wet and slippery ramps, aircraft surfaces and work stands, and in temperature and humidity extremes. Subject to the dangers from toxic fumes, oil, heat, fluids, shock, high noise level, possible cuts, abrasions and burns, extremely low temperature cryogenic liquids and extremely high air pressures. PHYSICAL EFFORT: Frequent climbing, bending, reaching, crouching, stooping, kneeling and arm movement is required. Some work is performed in awkward positions or in cramped areas. Frequently lifts and carries items weighing up to 40 pounds and occasionally lifts heavier items using jacks, hoists, or other helpers.

Qualifications

GENERAL EXPERIENCE: Experience or training which demonstrates the knowledge of mechanical maintenance work; ability to read and use technical manuals, illustrations, diagrams and schematics, and skill in the use of equipment and hand tools used in troubleshooting, testing and repairing equipment. SPECIALIZED EXPERIENCE: Your resume and any other supporting documentation you wish to provide must clearly substantiate you currently possess 6, 12 or 18 months of specialized experience in the following: WG-05 REQUIRES 6 MONTHS: Experience or training using common hand tools and making repetitive repairs. Experience which demonstrates the ability to perform the simpler and routine duties of the trade. Knowledge of safety regulations and practices. WG-08 REQUIRES 12 MONTHS: Experience or training must demonstrate a basic understanding of electrical, hydraulic, and pneumatic theory and the makeup and operation of the various individual systems and their interrelationships. Experience using a small variety of test and measurement devices. Experience removing, adjusting, replacing, cleaning, and installing a variety of parts, components and accessories. Experience reading and interpreting technical manuals, blueprints, diagrams, and schematics. WG-10 REQUIRES 18 MONTHS: Experience or training removing, adjusting, replacing, cleaning, and installing parts, components, and accessories. Experience which provided working knowledge of mechanical, electrical, and hydraulic theory applying to powered support equipment and systems; and skill to replace, fit, install, and make adjustments. Experience which provided working knowledge of the makeup and operation of the various individual systems maintained and their interrelationships. Experience reading and interpreting parts lists, manufactures' repair manuals, diagrams, and electrical schematics. KNOWLEDGE, SKILLS AND ABILITIES: Knowledge of mechanical, electrical and hydraulic systems and components related to aircraft ground equipment is required. Ability to trouble-shoot, repair, overhaul, or rebuild engines, generators, starter motors, carburetors, etc. Ability to read and use technical manuals, wiring diagrams and schematic drawings. Ability to use a wide range of test and repair equipment. COMPATIBLE MILITARY ASSIGNMENT: All applications will be considered regardless of Branch/AOC/FA/MOS. Incumbent will be required to be assigned to compatible military position within 1 year of selection. The selected individual may be required to attend formal technician school training. MILITARY GRADE (Prior to Application): Enlisted: E-1 through E-5 UNIT OF ASSIGNMENT: Any aviation unit within state SPECIAL REQUIREMENTS: This position is covered by the medical monitoring program. Individual selected must undergo a preemployment physical examination prior to appointment. This position requires a security clearance (secret) which the applicant must possess or be able to obtain a clearance within one year of appointment. CONDITION OF EMPLOYMENT: Training at the National Guard Professional Education Center (NGPEC) is a mandatory condition of employment, subject to availability of resources. NGB prescribed courses at NGPEC must be completed within 6 months of assignment to this position. Failure to complete course(s) may result in reassignment or termination of full-time employment unless extenuating circumstances preclude course attendance. STATEMENT OF DIFFERENCE: Individual selected at a lower level will be issued a Statement of Difference. Predicated upon qualifications, individual could be hired at the WG-10 grade. An individual selected for this position at the lower grade will progressively be advanced to WG-10 upon achievement of required qualifications without further competition.

Education

No substitution of education for specialized experience.

How to apply

To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below. A complete application package must be submitted by 09/28/2026 on to receive consideration. To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application. Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process. All resumes, narrative statements, and supporting documents must be the applicant's own original work and accurately represent their qualifications. Plagiarism or the submission of materials created or substantially authored by another individual or an artificial intelligence (AI) tool may constitute material misrepresentation and may result in disqualification from the hiring process. After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process. You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login). All of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how­to/application/status/. You may also check the status of your application by contacting the phone number or email address listed in the Agency Contact Information below.