AIRCRAFT ENGINE MECHANIC

Summary

This is an Air Reserve Technician (ART) position. ARTs are part of the regular career civil service and enjoy all the benefits granted to Federal employees in the competitive civil service. Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information.

Duties

• Serves as technical authority to perform/coordinate/oversee troubleshooting and analysis of gas turbine engines to determine air worthiness of propulsion systems installed on aircraft on the flight-line and uninstalled in back shop and test cell capacities. Coordinates, oversees and performs the disassembly, repair, overhaul, inspection and reassembly of aircraft propulsion systems, sub-assemblies, and components. Determines degree of disassembly required to repair or replace defective parts or components, make prescribed modifications and make final adjustments to achieve acceptable propulsion systems operation. Skilled/certified in the operation and maintenance of diagnostic test equipment, on-board electronic equipment, a variety of special equipment, hand, measurement and power tools. Enforces and complies with safety practices and procedures following established safety rules and regulations and maintains a safe and clean work area. Certify, utilize and enforce the work produced under the USAF Technical Order Program and applicable commercial aircraft/propulsion manuals. Removes or installs entire propulsion systems from/on aircraft, test cell and maintenance stand working as a member or leader of a team. Maintain, inspect, operate and certify test cell and hush house. Perform Engine Health Management (EHM) program duties and properly document propulsion system maintenance in historical records and the Maintenance Information System (MIS). Prepares effective training plans to maximize training for assigned personnel.

Qualifications

In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C for WG-8600 - Engine Overhaul Family. QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-8600 - Engine Overhaul Family. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time. The screen out element for this position is the ability to do the work of an Aircraft Engine Mechanic without more than normal supervision. JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: 1. Knowledge of the installation, operation, and repair of gas turbine or reciprocating aircraft engines and accessory systems. 2. Knowledge of engine repair practices to identify and correctly choose between alternative methods and trade techniques, adapt accepted repair procedures to new or unfamiliar engines or accessory systems, to anticipate required tools and parts, and to set up the work area. 3. Knowledge of safety regulations, practices, and procedures. Knowledge of documentation procedures. 4. Skill in the use of measuring instruments such as vibration analyzers, pyrometers, engine analyzers, engine diagnostic computer systems, data transfer sets, and test benches. 5. Knowledge in the interpretation, certification and use of technical orders, manufacturers'' manuals, engine records, maintenance bulletins, and other technical information. 6. Ability to troubleshoot engine malfunctions, interpret trouble reports or observed instrument readings, appearances, etc., make a tentative diagnosis; select needed tools and test equipment; and disassemble the engine or accessory system to locate the defect. Ability to repair and rework engine parts and components and replace accessories such as portions of electrical, pneumatic, and hydraulic systems. FUNCTIONAL REQUIREMENTS: The work requires moderate to strenuous effort. Must stand, stoop, bend, and reach for extended periods of time. Frequently handles items weighing up to 20 pounds, and often lift and carry assemblies weighing up to 50 pounds. Hoists, hand trucks, lifts, and other employees are available to assist when handling heavy or awkward items. May be required to climb steps and ladders and stand on slippery or inclined surfaces. ENVIRONMENTAL FACTORS: Work is performed in hanger areas, outdoors, in parked aircraft, and sometimes in hazardous noise areas. Exposed to extremes in heat, cold, humidity and inclement weather. Must work in confined areas and in awkward positions. Exposed to dirt, grease, and aircraft fluids, oil, hydraulic fluid, solvents, and hazardous fluids and gases such as Hydrazine and Halon. Subject to cuts, bruises, muscle strain, and injury from falls off scaffolds, ladders, and aircraft surfaces. Slippery or uneven walking surfaces. Working around machinery with moving parts. Working around moving objects or vehicles. May be exposed to intake suction and hot exhaust blast. Working closely with others. Working alone. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment.You will receive credit for all qualifying experience, including volunteer experience.

How to apply

The complete Application Package must be submitted by 11:59 PM (ET) on 09/11/2026. To preview the Application Questionnaire, please click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/13056011 To begin the process, click the Apply Online button to create an account or log in to your existing USAJOBS account. Follow the prompts to complete the application questionnaire. Please ensure you click the Submit My Application button at the end of the process. To apply for this position, you must provide a complete Application Package which includes: 1. Your Resume. If you submit more than one resume, only the most recent will be reviewed. The "most recent" is considered the resume with the latest timestamp. Resumes may not exceed two pages. The two-page resume ensures the most relevant experience is reviewed and considered, which is a common practice in both the public and private sectors. Resumes exceeding two pages will be removed from consideration. Additional information on how to complete or update your resume may be located here. For qualification determination your resume must contain hours worked per week and dates of employment (i.e., month/year to month/year or month/year to present). If your resume does not contain this information, your application may be marked as insufficient, and you will not receive consideration for this position. If you are a current Federal employee or previous Federal employee, provide your pay plan, series and grade, i.e. GS-0301-09. Current Federal Civilian Employees may list any relevant performance related rating (given within the last three years) and/or incentive awards in your resume. Do NOT include photographs, inappropriate material, inappropriate content, nor personal information such as age, gender, religion, social security number, etc., on your resume. If the resume you submit contains such information you will not be considered for this vacancy. Your name, first and last, MUST be included on your resume. 2. A complete Application Questionnaire 3. Additional Required Documents (see Required Documents section). Ensure all submitted documents contain your full name. 4. Help recruiters find you. Make your resume and profile searchable, which means recruiters may contact you about possible jobs. Additional information may be located here. PLEASE NOTE: It is the applicant's responsibility to verify that information entered and/or uploaded, (i.e., resume) is received, accurate, and submitted by the closing date. You may verify your documents have been processed with your application package successfully. You can access your USAJOBS account to do so by clicking here. Uploaded documents may take up to one hour to clear the virus scan. Human Resources WILL NOT modify or change any answers submitted by an applicant.