SMALL ARMS REPAIRER

Summary

This is a Washington Army National Guard Title 32 Excepted Service Unit Technician position: SMALL ARMS REPAIRER Location: Washington Combined Support Maintenance Shop G4-M JBLM, Washington 98433 Army National Guard Units Appointment Type: Permanent, excepted service Advertised as: ENLISTED/WARRANT OFFICER May be used to fill one or more vacancies. *Ensure you read this announcement in its entirety, complete all application requirements, and your USA Jobs profile name is accurate*

Duties

• A WG-6610-9, SMALL ARMS REPAIRER: Performs accurization of national match weapons (pistols, rifles, and light machine guns) on a limited basis. Accurization involves altering and refining mass-produced weapons for use in national competition, by increasing their accuracy and reliability beyond factory specifications. This process involves selecting, fitting, and altering parts to improve the weapon. Altering includes peening, bending, filing, grinding, and the use of lapping compound to alter parts such as individual slide, receiver, sear, disconnector, barrel, barrel bushing, magazine, hammer, recoil spring, flash suppressor, operating rod spring guide, gas cylinder, stock, and the spindle valve. Disassembles weapons, assemblies, subassemblies and other components. Examines for defects, misalignment and malfunctions. Replaces barrels, firing pins, springs, trigger mechanisms, shell ejectors, and other parts and assemblies. Modifies small weapons by replacing worn or obsolete parts and using hand and power tools, precision gauges, test instruments, jigs and alignment devices in making repairs, modifications, and adjustments. Applies final finishes and test fires and/or performs operational checks of arms repaired to ensure safety, accuracy, and ease of operation. Performs overhaul, maintenance, and repair on a variety of small arms. Diagnoses and identifies mechanical deficiencies and/or malfunctions in weapons including: automatic pistols, revolvers, shotguns, automatic rifles, grenade launchers, machine guns, and rocket launchers, and other small arms and accessories. Uses micrometer to measure altered tolerances and makes additional adjustments as required. Anneals certain parts until the proper temper of the metal is obtained. Selects certain parts of specific hardness by researching characteristics of various metals in technical manuals. Uses pre-set specifications to ensure that critical operating tolerances are met. Test fires weapons to ensure that they meet desired performance requirements. Is responsible for accountability, storage and security of arms and other sensitive items while they are kept for repair, usually in vaults with limited access. May serve as a commodity inspector during Command Maintenance Management evaluations (COMET) or as a member of a Maintenance Assistance Instruction Team (MAIT). Other duties as assigned.(temporary, minor, or incidental tasks)

Qualifications

GENERAL EXPERIENCE: Experience or training which demonstrates a working knowledge to read and interpret instructions, repair manual, specifications, and drawings; must have a knowledge of shop mathematics sufficient to use testing devices and measuring instruments; and be proficient in the use and maintenance of hand tools and equipment. SPECIALIZED EXPERIENCE: Must have at least 18 months experience or training with substantial mechanical skill is required to effectively and efficiently repair, overhaul, and rebuild small arms for both conventional uses and for weapons involving accurizing. Experience to inspect, diagnose malfunctioning, wear and/or damage is required. The ability to perform accurizing procedures on weapons to improve their performance is required. Basic knowledge of other trades to modify and/or manufacture weapons parts for accurizing is required. Experience to apply technical manuals, regulations, specifications and drawings to determine operation, assembly, and tolerances of the variety of weapons worked on is required for successful performance. Experience using and maintaining a variety of hand and power tools and gages is required. Tools include drills, files, precision gages and measuring instruments, magnafluxing equipment and/or borescopes to determine when parts are worn or damaged beyond acceptable tolerances.

Requirements

MILITARY REQUIREMENTS: Military Grades: E1 - E9, WO1 Desired Military Assignments: 94/25/91/92/12/88/913/915/948/922 Series - Applicants need not be assigned to the position or possess the MOS to apply or be considered for selection. Selected applicant must be assigned to a compatible Military position and attain MOS within 1 year of appointment action. - May be required to successfully complete a trial period. - Participation in direct deposit is mandatory. - All soldiers, civilian employees, and contractor employees who drive Army-owned or leased vehicles must complete the Army Avoidance Course (AAC) training when they start working for the Army. Must have a valid Washington state and military driver's license. Must be able to obtain a Government Travel Card (GTC) and be able to attend all schools deemed necessary by the supervisor. - Males born after 31 December 1959 must be registered for Selective Service. - Must maintain membership in the WA Army National Guard for continued employment. - Must be able to obtain and maintain the appropriate security clearance of the position. - This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position. - Position requires ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission. - May occasionally be required to work other than normal duty hours; overtime may be required. - The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.

Education

Education Requirements: High School Diploma or GED Degree Required: N/A Degree Required to qualify with Education Only (No Specialized Experience): N/A You must provide transcripts or other documentation to support your Educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position. If you are selected for a vacancy that requires a specific degree and/or coursework you will be required to provide official transcripts prior to appointment. Substitution of Education for Specialized Experience: Not Applicable.

How to apply

To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below. A complete application package must be submitted by 11:59 PM (EST) on 09/13/2026 to receive consideration. Failure to submit all required documents by the closing date will result in disqualification. To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application. Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process. After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process. You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/