Aviation Safety Inspector(GAM) ( Principal Maintenance Inspector)

Summary

The Principal Maintenance Inspector (PMI) is responsible for applying substantial knowledge of and experience with Title 14 of the Code of Federal Regulations (14 CFR) for the development and implementation of standards, programs, and procedures for Federal Aviation Administration (FAA) field personnel and the public governing all matters to general aviation maintenance safety issues.

Duties

• The PMI receives administrative direction from management in terms of broadly defined missions or functions. The PMI, mostly independently plans, designs, and carries out programs, projects, studies, or other work. The PMI provides policy assistance to field level Aviation Safety Inspectors (ASIs) on difficult or complex policy interpretations. The work is normally accepted without change. Completed work may be reviewed for adherence to FAA policy and for assurance that project requirements have been fulfilled. Some FG-14 assignments involve Service wide responsibility for application of expert knowledge of general aviation maintenance. Other FG-14 inspectors establish technical procedures and performance yardsticks and review maintenance programs, or who have problems of comparable scope and complexity, or a uniquely complex group of general aviation organizations. Assignments at this level are of great scope and unusual complexity and the organizations monitored are major factors in the industry. ASIs at the FG-14 level establish technical procedures and performance indexes and review complete maintenance programs for general aviation organizations who are leaders in the aviation industry, or who have problems of comparable scope and complexity, or a uniquely complex group of general aviation organizations. Assignments at this level are of great scope and unusual complexity. The following assignments are illustrative: 1. As a Service wide expert on a particular type of aircraft: - Advises other inspectors of major changes; - Evaluates new training methods and equipment; - Serves on boards that evaluate incidents, accidents, complaints, and other serious problems relating to the aircraft. 2. As the principal representative in regulatory surveillance of general aviation activities, exercises certificate authority; or evaluates maintenance activities and complete aircraft overhaul facilities (By comparison, FG-13 employees exercise certificate authority over less complex air carriers or perform major portions of the certification, inspection, and surveillance for major carriers under the direction of FG-14 inspectors.) 3. Exercises certificate authority and safety responsibility over a complex of broad and varied general aviation organizations such as air taxis, executive and/or industrial operators, repair stations, and flight and mechanic schools when the activities monitored equate collectively to a major air carrier in terms of size and complexity of aircraft fleet employed, scope and technical complexity of operations, management sophistication, industry leadership, and public impact. The magnitude, intensity, and scope of program responsibility are typically such as to require significant and regular assistance of lower graded inspectors. FG-14 employees evaluate maintenance programs for organizations which utilize complex aircraft, systems, and equipment. They frequently rely on engineers and designers for specific technical guidance. Supervisors give FG-14 employees a wide leeway for independent action. Other inspectors seek their advice on problems relating to aircraft and their operation and maintenance. Because of the precedent-setting nature or substantial effect on the aviation industry or public safety, their decisions may be reviewed and approved at a higher policy-setting level. The PMI plans and directs the use of time and resources to accomplish organizational objectives. He or she defines, organizes, and uses resources to accomplish work activities within established schedules, analyzes program requirements and accomplishments, and makes or directs adjustments as necessary to address organizational needs. Provides guidance to field level staff to solve difficult technical issues. Contacts are internal and external to the agency. Occasionally represents the agency as a point of contact for policy development, inspection activities or as a technical trainer/instructor delivering formal. Performs other duties as required.

Qualifications

OPM General Schedule Qualification Standards for Aviation Safety Series, 1825 General Requirements for All Positions: Not more than two separate incidents involving Federal aviation regulations violations in the last 5 years; Valid State driver's license; Fluency in the English language; No chemical dependencies or drug abuse that could interfere with job performance; and High school diploma or equivalent Medical Requirements for All Positions: Applicants must be physically able to perform the duties of the Aviation Safety Inspector position in a safe and efficient manner, with or without a reasonable accommodation, and must meet all of the following requirements: Have good distant vision in each eye and be able to read, without strain, printed materials the size of typewritten characters (glasses and contact lenses permitted); Have the ability to hear the conversational voice (hearing aid permitted); and Not have any physical condition that would cause them to be a hazard to themselves or others that would interfere with their ability to fly as passengers in a variety of aircraft. When the predominant work involves general aviation maintenance, applicants for Aviation Safety Inspector (Airworthiness) positions must meet all of the following requirements. Experience involving the maintenance and repair of airframes, power plants, and aircraft systems with responsibility for certifying airworthiness. Maintenance experience with aircraft 12,500 pounds or less maximum certificated takeoff weight. Aircraft maintenance experience in a repair station; air carrier or airline repair facility; military repair facility; or local, state or Federal governmental agency. Aircraft maintenance work experience within the last 3 years. FAA Mechanic Certificate with airframe and power plant ratings. Note: Recency of specialized experience is waived for current and former FAA employees in the 1825 series. Certificate and Ratings: This position requires a certificate and ratings for minimum qualification in the following specialty: General Aviation Maintenance. A copy of the certificate and ratings are required for ALL candidates newly appointed to the FAA in the 1825 specialty of General Aviation Maintenance. Therefore, applicants must submit a copy of their certificate and ratings unless they are currently occupying (or previously held) General Aviation (Maintenance) 1825 Series Position. Specialized Experience: To qualify for this position you must demonstrate in your application that you possess at least one year (52 weeks) of specialized experience equivalent to the (FV-I, FG/GS-13) level. Specialized experience is experience that has equipped you with the particular knowledge, skills, and abilities to perform successfully the duties of the position and is typically in or related to the work of the position to be filled. Specialized Experience includes: experience assisting, conducting, or performing various technical functions related to certification, surveillance, investigation, and enforcement activities. Additional experience in investigating and reporting on accidents, incidents, and violations. QUALIFICATION REQUIREMENTS MUST BE MET BY THE CLOSING DATE OF THIS VACANCY ANNOUNCEMENT. Knowledge, Skill, and Ability (KSA): As a part of the Federal-Wide Hiring Reform Initiative (streamlining the hiring process), the FAA is committed to eliminating the use of the Knowledge, Skills and Ability (KSA) narratives from the initial application in the hiring process for all announcements. Therefore, as an applicant for this announcement, you are NOT required to provide a narrative response in the text box listed below each KSA. In lieu of providing a KSA narrative response in the text box listed below each KSA, in your work history, please include information that provides specific examples of how you meet the response level or answer you chose for each KSA. Your work history examples should be specific and clearly reflect the highest level of ability. Your KSA answers will be evaluated further to validate whether the level that you selected is appropriate. Your answers may be adjusted by a Human Resource Specialist as appropriate. Eligible applicants meeting the minimum qualification requirements and selective factor(s), if applicable, may be further evaluated on the Knowledge, Skills and Abilities (KSA) listed in the announcement. Based on this evaluation, applicants will be placed in one of the following categories: score order, category grouping, or alphabetical and referred to the selecting official for consideration.

Requirements

We are not accepting applications from noncitizens.

Education

N/A

How to apply

Applicants may be required to complete one or multiple assessments as part of the evaluation process. This assessment aims to evaluate the competencies and qualifications essential for the position. You must apply online to receive consideration. Your application must be submitted by 11:59 PM Eastern Time on the Close Date for it to be accepted. If you are applying for positions associated with FAA registers, your application must be submitted at the time a referral list is created in order to receive consideration for positions associated with a register. RESUMES ARE LIMITED TO TWO PAGES. IN DESCRIBING YOUR WORK EXPERIENCE AND/OR EDUCATION, PLEASE BE CLEAR AND SPECIFIC AND INCLUDE INFORMATION AS IT RELATES TO THE QUALIFICATIONS AND SPECIALIZED EXPERIENCE REQUIREMENTS OF THIS POSITION. Please ensure EACH work history includes ALL of the following information: Job Title (include series and grade if Federal Job) Relevant work experience: should align to the Job Announcement and address all required qualifications and include job title, employer name, start/end dates, number of hours worked per week. Education, certification or licensure: If required, education should include school/institution name, completion date, degree type and GPA. Determining length of General or Specialized Experience is dependent on the above information and failure to provide ALL of this information may result in a finding of ineligible. You may upload completed documents to your USAJOBS Account. This will provide you the opportunity to utilize the uploaded information again when applying for future vacancies.