CIVIL ENGINEER

Summary

You will serve as a CIVIL ENGINEER. This position is located within the Department of the Interior, Bureau of Reclamation, Upper Colorado Region, Four Corners Construction Office, located in FARMINGTON, NEW MEXICO. Pay will vary based on grade level for which selected. First time hires to the Federal government normally start at the step 1 rate.

Duties

• At the full performance level, some of the major duties you will perform include but are not limited to the following: Performs engineering analyses to include performing and coordinating technical planning activities; data collection (including validation and management); modeling and data analyses; analyses of site location and/or conditions; risk estimation and analyses; or analyses of instrumentation data. Completes and/or reviews engineering designs to include: 1) planning and conducting engineering studies or evaluations such as preliminary, appraisal, feasibility, final design, and value planning/value engineering; 2) creating, performing, reviewing, checking, and/or modeling engineering designs; 3) developing design criteria, procedures, and instructions; 4) providing technical approval as the engineer in responsible charge of design activities and engineering decisions; 5) contributing to the design and modifications of new and existing complex features to mitigate static, dynamic, and hydrologic/hydraulic loadings; or 6) design, installation, and maintenance of instrumentation systems to provide engineering data for analysis and/or operational decision support. Evaluates engineering aspects of state and federal regulatory and permitting programs, conducting bond adequacy reviews, oversight reviews, and reviews on federal lands and in states with resource extraction programs under direct federal jurisdiction. Develops project guidelines, protocols, and procedures that are specific to the project; and may review for comment or propose draft Bureau directives, standards, and policies. Plans, schedules, coordinates, and conducts civil engineering facility examinations, reviews, and/or inspections which include conducting condition assessments and construction and transfer inspections; identifying deficiencies relative to design criteria, applicable codes and standards, or state or federal statutes or regulations; calculating preliminary estimates for repairs; coordinating with internal and external partners; documenting and presenting results; identifying future needs for the asset investment such as extraordinary maintenance and rehabilitation; and project management planning. Develops, monitors, and manages project plans that outline the scope, schedule, and budget of assigned projects. Works with Contracting Officer/Grants Officer/Awarding Official to implement and administer a variety of assigned contracts, including construction contracts, service or supply contracts, P.L. 93- 638 Indian Self Determination and Education Assistance Act as amended contracts/agreements, interagency agreements, and financial assistance agreements. Provides engineering support in connection with regulatory program oversight, policy and rulemaking efforts, review of regulatory compliance issues, and resolution of engineering related issues as they are encountered. Develops, modifies, and utilizes relational databases to maintain engineering data for conducting operational and planning analyses. Duties will be developmental in nature when filled below the full performance level.

Qualifications

Qualifications: All qualifications must be met by the closing date of this announcement - 09/18/2026 - unless otherwise stated in this vacancy announcement. To receive credit for experience, your resume MUST state either "full-time" (or "40 hours a week") or "part-time" with the number of hours worked per week to ensure proper crediting of specialized experience. Failure to adequately provide information needed to determine number of hours worked in each position may result in that time not being credited when evaluating qualifying experience. For periods of time that reflect military service, the DD-214 or Statement of Service is sufficient to meet the full and/or part-time hours requirement as the service dates will be reflected. Minimum Qualification Requirements: To qualify for this position, you must meet the following minimum qualifications: Basic Educational Requirements: In addition to the specialized experience requirements for this position, you must meet at least one of the following: A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.) -AND- Specialized experience at the GS-11 level: To qualify for this position at the GS-11, you must possess one year of specialized experience equivalent in difficulty and complexity to at least the GS-9 level in the Federal Service having demonstrated experience performing a minimum of two or more of the following duties: - Performs engineering analysis to include performing and/or coordinating technical planning activities; - Completes and/or reviews engineering designs, drawings or reports. - Participates in and /or leads technical work groups or teams. - Plans, schedules, coordinates, and conducts civil engineering facility examinations, reviews, and/or inspections; - Provides technical reviews, peer reviews, and checking of designs, drawings, engineering analysis, and technical documents, specifications, and contract correspondence; - Provides technical guidance, training, and advice to lower graded engineers and technicians; OR - Develops, monitors, and manages project plans that outline the scope, schedule, and/or budget of assigned projects. OR Education: Successful completion of at least 3 years of progressively higher-level graduate education leading to a Ph.D. degree or Ph.D. or equivalent doctoral degree. (Degree must reflect the knowledge, skills, and abilities necessary to do the work.). You must include transcripts. OR Combination You may combine specialized experience and education to meet the minimum qualifications. Specialized experience at the GS-12 level: To qualify for this position at the GS-12 grade level, you must possess a Professional Engineering (PE) License and one full year of professional experience equivalent to the GS-11 level in the Federal Service having demonstrated specialized experience performing a minimum of four or more of the following duties: - Performs engineering analysis to include performing and/or coordinating technical planning activities; - Completes and/or reviews engineering designs, drawings or reports. - Participates in and /or leads technical work groups or teams. - Plans, schedules, coordinates, and conducts civil engineering facility examinations, reviews, and/or inspections; - Provides technical reviews, peer reviews, and checking of designs, drawings, engineering analysis, and technical documents, specifications, and contract correspondence; - Provides technical guidance, training, and advice to lower graded engineers and technicians; OR - Develops, monitors, and manages project plans that outline the scope, schedule, and/or budget of assigned projects. Professional Engineering registration is required by Reclamation Policy (GS-12 level only). Volunteer Experience: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Requirements

Must be a U.S. Citizen or National. Appointment subject to background investigation and favorable adjudication. Males born after 12-31-59 must be registered for Selective Service. Direct Deposit participation required. Successfully pass the E-Verify employment verification check. To learn more, visit www.dhs.gov/EVerify/. Must have and maintain a valid driver's license throughout employment. Professional Engineering registration is required by Reclamation Policy (GS-12 level only). As a condition of employment for accepting this position, you will be required to serve a 1-year probationary period during which your fitness and whether your continued employment advances the public interest will be evaluated. This probationary period is an extension of the appointment process and therefore requires the agency to determine if continued employment would advance the public interest, meet the organization goals and mission of the agency, and/or otherwise promote the efficiency of the service. In determining if your employment advances the public interest, the agency will consider: your performance and conduct; the needs and interests of the agency; whether your continued employment would advance organizational goals of the agency or the Government; and whether your continued employment would advance the efficiency of the Federal service. Under applicable law, the employment of an individual serving a probationary or trial period automatically terminates when that period ends unless the agency affirmatively certifies, in writing, that the individual's employment should continue and that their appointment should be finalized. In the absence of agency action to affirmatively certify continued employment beyond the probationary or trial period, such appointments are terminated. Upon completion of your probationary period your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.

Education

This position has a mandatory education requirement. You must submit a copy of your transcript(s) to support claimed education. Transcripts must include your name, school name, grades, credit hours earned, major(s), grade point average or class ranking, and date the degree was conferred, if applicable. A typed list of courses, grades, semester/quarter hours, GPA, etc. will not be accepted. Non-submission may result in being rated not qualified for the position. Unofficial transcripts are acceptable, but if you are selected for this position and you used your education to qualify, you must provide official transcripts before you begin work. Foreign Education: To receive credit for education completed outside the United States, you must show proof that the education has been submitted to a private organization that specializes in interpretation of foreign educational credentials and such education has been deemed at least equivalent to that gained in conventional U.S. education programs. Recognition of Foreign Qualifications | U.S. Department of Education. https://www.ed.gov/about/initiatives/international-affairs/recognition-of-foreign-qualification

How to apply

Please read the entire announcement and all the instructions before you begin an application. To apply for and be considered for this position, you must complete all required questionnaires, assessments and submit all required documentation as specified in the How to Apply and Required Documents section. The complete application package must be submitted by 11:59 PM (ET) on the 09/18/2026 -- unless otherwise stated in this vacancy announcement to receive consideration. The application process is as follows: Click the Apply Online button. Answer the questions presented in the application and attach all necessary supporting documentation. To PREVIEW the application questionnaire, select the following link: https://apply.usastaffing.gov/ViewQuestionnaire/13045046 Click the Submit Application button prior to 11:59 PM (ET) on the announcement closing date. If you are required to complete any USA Hire Assessments, you will be notified after submitting your application. The notification will be provided in your application submission screen and via email. The notification will include your unique assessment access link to the USA Hire system and the completion deadline. Additionally, in USAJOBS you can click "Track this application" to return to your assessment completion notice. Access USA Hire using your unique assessment link. Access is granted through your USAJOBS login credentials. Review all instructions prior to beginning your assessments. You will have the opportunity to request a testing accommodation before beginning the assessments should you have a disability covered under the Rehabilitation Act of 1973 as amended. Set aside at least 3 hours to take the USA Hire Assessments; however, most applicants complete the assessments in less time. If you need to stop the assessments and continue later, you can re-use your unique assessment link. Your responses to the USA Hire Assessments will be reused for one year (in most cases) from the date you complete an assessment. If future applications you submit require completion of the same assessments, your responses will be automatically reused. Visit the USA Hire Applicant Resource Center for practice assessments and assessment preparation resources. To update your application, including supporting documentation: During the announcement open period, return to your USAJOBS account, find your application record, and click Edit my application. This option will no longer be available once the announcement has closed. To view the announcement status or your application status, visit https://help.usajobs.gov/how-to/application/status. Applicants who apply under this job opportunity announcement agree to have their application, associated documents and applicable personal information shared with other Bureaus/Offices within the Department of the Interior (DOI) who have vacancies within the same occupational series, grade, full performance level and in the same geographic location(s), including within the same metro/commuting area. Applying to this announcement does not replace the need to apply to other job opportunity announcements for which you wish to receive consideration.