FUL-Engineering Technician (Petroleum)

Summary

You will serve as a FUL-Engineering Technician (Petroleum) with The Bureau of Land Management. . This position is also open to status candidates under announcement NDFO-26-13048815-ST-MH. You must apply to each announcement separately if you wish to be considered under both recruitment methods. Pay will vary based on grade level and/or duty location for which you're selected. First time hires to the Federal government normally start at the step 1 rate.

Duties

• Some of the major duties you will perform include but are not limited to the following: Perform inspections of oil and gas operations and enforces all appropriate laws, rules, and regulations as well as the terms and conditions specified in the various approvals. Perform on-site compliance inspections for all phases of oil and gas operations, specifically: drilling and work-over, production, environmental, and plugging and abandonment. Prepare documentation after compliance inspection(s) are complete and issues Written Orders and Incidents of Non-Compliance (INC) when problems or violations are noted during inspection(s). Complete follow-up inspections to determine if compliance was met by operators and recommends further action as necessary. If required, prepare documents for evidence in legal contests. Utilize applicable government databases to document inspections and completes enforcement actions as applicable within the database. Duties will be developmental in nature when filled below the full performance level.

Qualifications

Requirements Continued... Under applicable law, the employment of an individual serving a probationary or trial period automatically terminates when that period ends unless the agency affirmatively certifies, in writing, that the individual's employment should continue and that their appointment should be finalized. In the absence of agency action to affirmatively certify continued employment beyond the probationary or trial period, such appointments are terminated. Upon completion of your probationary period your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest. Qualifications: All qualifications must be met by the closing date of this announcement-09/16/2026-unless otherwise stated in this vacancy announcement. All candidates must also meet Time-in-Grade requirements. To receive credit for experience, your resume MUST state either "full-time" (or "40 hours a week") or "part-time" with the number of hours worked per week to ensure proper crediting of specialized experience. Failure to adequately provide information needed to determine number of hours worked in each position may result in that time not being credited when evaluating qualifying experience. For periods of time that reflect military service, the DD-214 or Statement of Service is sufficient to meet the full and/or part-time hours requirement as the service dates will be reflected. Minimum Qualification Requirements: To qualify for this position, you must meet the following minimum qualifications: To qualify for this position at the GS-06 grade level: Specialized Experience Requirement: To qualify, you must possess at least one full year of specialized experience equivalent to the GS-05 level in the Federal service (obtained in either the public or private sectors). Specialized experience is defined as performing duties such as: Applies standardized rules and procedures, requiring extended training or experience to determine and select the most efficient methods. Documents observations, recommendations, compliance, noncompliance, and occasional verbal communications, through preparation of forms and data base entries for review by supervisor or more senior technician. You must include hours per week worked. -OR- Education: Successful completion of at least one full year of graduate education directly related to the work of this position (i.e., major study in petroleum engineering or a related field). You must include transcripts. -OR- Combination of education and experience as listed above. To combine education and experience, first take the percentage of 1 year course of study completed in graduate school. Then take the number of months of full-time experience and divide by 12 months. Add the percentages together. The total must equal at least 100 percent to qualify. You must include hours per week and transcripts. To qualify for this position at the GS-07 grade level: Specialized Experience Requirement: To qualify, you must possess at least one full year of specialized experience equivalent to the GS-06 level in the Federal service (obtained in either the public or private sectors). Specialized experience is defined as performing duties such as: Utilize monitoring systems for drilling fluids. Operate and maintain drilling and production equipment. Safety compliance (i.e. follow procedures, check surface casing, and check cementing operations). Work closely with engineers and other technical teams to optimize production methods. You must include hours per week worked. -OR- Education: Successful completion of at least one year of GRADUATE education directly related to the work of this position (i.e., major study in petroleum engineering or a related field). You must include transcripts. -OR- Combination of education and experience as listed above. To combine education and experience, first take the percentage of 1 year course of study completed in graduate school. Then take the number of months of full-time experience and divide by 12 months. Add the percentages together. The total must equal at least 100 percent to qualify. You must include hours per week and transcripts. To qualify for this position at the GS-08 grade level: Specialized Experience Requirement: To qualify, you must possess at least one full year of specialized experience equivalent to the GS-07 level in the Federal service (obtained in either the public or private sectors). Specialized experience is defined as performing duties such as: Utilize monitoring systems for drilling fluids. Operate and maintain drilling and production equipment. Safety compliance (i.e. follow procedures, check surface casing, and check cementing operations). Work closely with engineers and other technical teams to optimize production methods. Work closely with engineers and other technical teams to optimize production methods. You must include hours per week worked. -OR- Education: Successful completion of at least Two full years of graduate education or a master's degree; education must be directly related to the work of a petroleum engineering technician (i.e., major study in petroleum engineering or a related field). You must include transcripts. -OR- Combination of education and experience as listed above. To combine education and experience, first take the percentage of 2 year course of study completed in graduate school or master's degree. Then take the number of months of full-time experience and divide by 12 months. Add the percentages together. The total must equal at least 100 percent to qualify. You must include hours per week and transcripts. Volunteer Experience: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Requirements

Must be a U.S. Citizen or National. Appointment subject to background investigation and favorable adjudication. Males born after 12-31-59 must be registered for Selective Service. Direct Deposit participation required. Successfully pass the E-Verify employment verification check. To learn more, visit www.dhs.gov/EVerify/. Must possess and maintain a valid driver's license throughout employment. You cannot hold an active real estate license, nor can you have an interest or hold stocks in firms with interest in Federal Lands. A financial disclosure report will be required within 30 days of appointment. You may be required to travel overnight away from home up to 1-3 nights per month. You must obtain a government charge card for travel purposes. You may be required to complete training and obtain/maintain a government charge card with travel and/or purchase authority. An applicant appointed to this position must possess (or obtain within 30 days of entrance on duty) and maintain a US Government Motor Vehicle Operator's Identification Card. You must successfully complete the BLM Petroleum Engineering Technician (PET) Certification Program and continue service in the Federal Government for 2 years from the date of obtaining certification. PET certification is required at the GS-10 and GS-11 grades and must be maintained. Probationary as a condition of employment for accepting this position, you will be required to serve a 1-year probationary during which your fitness and whether your continued employment advances the public interest will be evaluated. This probationary period is an extension of the appointment process and therefore requires the agency to determine if continued employment would advance the public interest, meet the organization goals and mission of the agency, and/or otherwise promote the efficiency of the service. In determining if your employment advances the public interest, the agency will consider: your performance and conduct; the needs and interests of the agency; whether your continued employment would advance organizational goals of the agency or the Government; and whether your continued employment would advance the efficiency of the Federal service. *Additional Requirements located under qualifications*

Education

You must submit a copy of your transcript(s) to support claimed education if substituting education for experience. Transcripts must include your name, school name, grades, credit hours earned, major(s), grade point average or class ranking, and date the degree was conferred, if applicable. A typed list of courses, grades, semester/quarter hours, GPA, etc. will not be accepted. Non-submission may result in being rated not qualified for the position. Unofficial transcripts are acceptable, but if you are selected for this position and you used your education to qualify, you must provide official transcripts before you begin work. Foreign Education: To receive credit for education completed outside the United States, you must show proof that the education has been submitted to a private organization that specializes in interpretation of foreign educational credentials and such education has been deemed at least equivalent to that gained in conventional U.S. education programs. Recognition of Foreign Qualifications | U.S. Department of Education. https://www.ed.gov/about/initiatives/international-affairs/recognition-of-foreign-qualification

How to apply

To apply for this position, you must submit the documentation specified in the Required Documents section. To receive consideration, your complete application package must be submitted by 11:59 PM (ET) on 09/16/2026-unless otherwise stated in this vacancy announcement to receive consideration. You must provide documentation to support your eligibility and qualification claims. Please review the required documentation listed in the eligibility sections to ensure you submit the appropriate information. You will only be considered for eligibilities for which you have provided the required supporting documentation. Applications may be submitted through USAJOBS or through other authorized methods identified by the agency (e.g., third-party platforms or local outreach efforts) to support targeted recruitment under this authority. Applicants submitting materials outside of USAJOBS must: Submit a complete application package by the 09/16/2026 of this announcement, and Ensure all materials are formatted and consistent with the application instructions outlined in this announcement, including resume requirements and supporting documentation. All applications, regardless of submission method, will be evaluated using the same criteria and requirements to ensure a fair and equitable hiring process. Applications received after the closing date, or that do not meet the requirements outlined in this announcement, will not be considered. USAJOBS Application Instructions Select Apply. If you are not logged in, you will be prompted to login or create an account. Prompted to Start the Application Process by selecting "Start Application." Click here for USAJobs Help with "How to create an application" To PREVIEW the application questionnaire, select the following link: https://apply.usastaffing.gov/ViewQuestionnaire/13052761 Select or add the resume you want to use for this application. Click here on how to build a resume in USAJOBS. Select documents you want included in this application. Review package to acknowledge your documents were reviewed. Select if you want to include your demographic information. After reading and certifying the application is true and submitted in good faith, select "Continue to Agency Site." Follow onscreen prompts and instructions to complete your application. Add the supporting documents by indexing your documents with the dropdown. Upload any missing required documents or optional documents. Review and Submit Application. While logged in, you can check the status of your application by selecting "+" next to the job title for this position. You can review or revise your application at any point during the open period of the announcement. To update an application, you should log into your USAJOBS account and select "+" next to the job title for this position. Select "Update Application" for this job. Note: When you click Update Application, you will be prompted to re-select your documents from USAJOBS. Documents submitted with the first application will no longer be associated with the applicant record. So it is important that you select all documents you want to use in the re-application.