AIRCRAFT PNEUDRAULIC SYSTEMS MECHANIC

Summary

This National Guard position is for a AIRCRAFT PNEUDRAULIC SYSTEMS MECHANIC, Position Description Number D1367000 and is part of the Oregon Air National Guard 142nd Wing, National Guard.

Duties

• As a AIRCRAFT PNEUDRAULIC SYSTEMS MECHANIC, WG-8268-8/10, this position is located in a National Guard aircraft maintenance organization. Its primary purpose is to perform on- and/or off-equipment maintenance on assigned aircraft pneudraulic systems, components and related aerospace ground equipment. (1) Performs maintenance and operational and functional checks on assigned pneudraulic systems. Troubleshoots, removes, inspects, installs, repairs, modifies, rebuilds, and/or tests pneudraulic systems and components for aircraft pneudraulic systems, associated ground support equipment, and/or related test equipment. Accomplishes periodic and special inspections on hydraulic components. Inspects all components and subsystems for operation, internal, and external leakage and servicing. Operates portable test stands for checkout of pneudraulic system. Removes, installs, and/or repairs Pneudraulic components from aircraft and associated aerospace ground equipment. Removes, disassembles, cleans, repairs, assembles components, and tests completed unit. Operates test equipment for all hydraulic components. Inspects for cracks, scratches, nicks, and holes on seals, gaskets, packings, and hoses. Modifies systems and their components. Rigs, adjusts, and aligns hydraulic components to ensure maximum operating efficiency. Polishes cylinders and pistons to ensure proper fit. Investigates pneudraulic failures to determine causes and accomplishes corrective maintenance. (2) Performs installation, modification, and/or repair of aircraft pneudraulic systems. Determines proper maintenance and repair procedures and minimum requirements pertaining to parts, clearance and tolerances, and performance characteristics of pneudraulic systems and related aerospace ground equipment. Solves unusual maintenance problems by studying layout drawings, schematic diagrams, applicable technical publications, and analyzing construction and operating characteristics of pneudraulic systems. Determines repair procedures necessary to correct defective equipment. Diagnoses recurring malfunctions and recommends corrective action by initiation of Quality Deficiency Reports, proposed modifications, or other appropriate actions. Performs Time Compliance Technical Orders (TCTOs) related to pneudraulic systems. Accomplishes local manufacture of hose assemblies and provides testing of aircraft tubing. Accomplishes hydraulic fluid sampling on assigned aircraft, test stands, and servicing equipment. Repairs in-flight refueling systems on tanker aircraft. (3) Performs organizational and field level maintenance to include periodic, phase time, calendar, unscheduled, and special inspection. Provides technical assistance to other shops concerning complicated interaction malfunctions between other systems, subsystems, and components. Jacks aircraft to simulate flight configuration, connects power sources, and uses cockpit controls, gauges, and additional precision instruments to check the operation of such items as landing gear doors, ground and flight spoilers and steering and brake systems for performance and conformance to operating specifications. (4) Prepares for and participates in various types of readiness evaluations such as ORI, IG and UE inspections, mobility, and command support exercises. May be required to perform such additional duties as structural fire fighting, aircraft fire/crash/rescue duty, serve as security guard, remove snow, load and handle munitions, launch/recover and service of aircraft, operate heavy equipment, maintain facilities and equipment, or serves as a member of a team to cope with natural disasters or civil emergencies. (5) Performs other duties as assigned. *The above description only mentions a limited amount of the position's official duties. For a full comprehensive document that covers all the duties of the position, please contact one of the Recruitment Specialists at the bottom of the announcement.

Qualifications

Areas of Consideration: Area 1 - Current permanent and indefinite T32 technicians of the Oregon ANG. Area 2 - Current permanent and indefinite T5 employees of the Oregon ANG. Area 3 - Current service members in the Oregon ANG. Area 4 - Individuals in the active duty US Air Force, Air Force Reserve, or Air National Guard. Area 5 - US Citizens eligible to meet the military requirements for membership in the Oregon ANG. GENERAL and SPECIALIZED EXPERIENCE QUALIFICATION REQUIREMENTS: Work involves maintenance, modification, and repair of hydraulic and pneumatic systems associated with aircraft. The work requires: knowledge of the physical principles governing the behavior of fluids (liquids and gases) as they pertain to hydraulic and pneumatic systems and their components; knowledge of aircraft structures and the relationship of hydraulic pneumatic systems to the structure and other aircraft systems; knowledge of basic electrical and mechanical principles; the ability to use technical manuals and schematics and to test for and isolate malfunctions in hydraulic and pneumatic systems; and the skill to effect modifications, repairs, or maintenance required. Experience or training which demonstrates your knowledge of basic electrical and mechanical principles; knowledge of troubleshooting procedures used to isolate malfunctions in aircraft pneudraulic systems; and ability to use technical manuals, equipment specifications, and test calibration procedures in performing the work. WG-08 Must have 12 months experience or training which provided a knowledge of basic electrical and mechanical principles. Experience in fabricating fuel, oil, and vacuum hose lines. Experience in servicing, maintaining, disassembling assembling, repairing and testing hydraulic and pneumatic systems. Experience in diagnosing malfunctions and overhauling pneudraulic accessories by disassembling, cleaning part and examining parts. Experience in diagnosing trouble and determining remedies. Experience in repairing, rebuilding, and overhauling major systems of ground equipment and pneumatic and hydraulic systems. Experience in mechanical repairs using hand tools and test equipment. Experience that demonstrates the ability to interpret technical manuals, specifications, and publications. WG -10 Must have 18 months experience or training which provided a knowledge of basic electrical and mechanical principles. Experience in fabricating fuel, oil, and vacuum hose lines. Experience in servicing, maintaining, disassembling assembling, repairing and testing hydraulic and pneumatic systems. Experience in diagnosing malfunctions and overhauling pneudraulic accessories by disassembling, cleaning part and examining parts. Experience in diagnosing trouble and determining remedies. Experience in repairing, rebuilding, and overhauling major systems of ground equipment and pneumatic and hydraulic systems. Experience in mechanical repairs using hand tools and test equipment. Experience that demonstrates the ability to interpret technical manuals, specifications, and publications.

Education

No education requirement associated with this position.

How to apply

To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below. A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application. Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process. After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process. You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.