ELECTRONIC MEASUREMENT EQUIPMENT MECHANIC - TITLE 32

Summary

THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This position is for an Electronic Measurement Equipment Mechanic, Position Description Number D1201000 located in the Combined Support Maintenance Shop-North, Atlanta, Georgia. This is a full-time, Excepted Permanent, dual status position which requires Georgia Army National Guard Membership. Area of Consideration: Open to current members of the Georgia Army National Guard.

Duties

• As an Electronic Measurement Equipment Mechanic, WG-2602-11, you will: Perform functional electronic, physical, and radioactive testing involving interpretation and analysis of measurement data, in accordance with cyclic inspection requirements. Set up system test sets and various types of test equipment such as frequency meters, standing wave ratio meters, radio frequency (RF) power meters, function/ arbitrary waveform generator, distortion analyzers, time frequency work stations, oscillators, voltmeters, electronic counters, oscilloscopes, attenuators, decade resistors and capacitors, signal generators, stroboscope, tachometers, pneumatic and hydraulic pressure standards and other physical and electronic tests. Check sweep rate by feeding known signal to an oscilloscope and observing wave pattern to correct shape and size. Operate equipment to complete range checking for proper operation of positioning controls. Use equipment schematics to analyze circuits by preparing block diagram showing major components such as amplifiers, filters, oscillators and indicators. Refer to technical manuals and manufactures specifications to obtain information on operation characteristics of circuit components such as integrated circuits, microprocessors, decoders, latching networks, notch filters, logics, controllers, programmable gain amplifiers, digital displays, transistors, tubes, transformers, coils, relays, motors, and similar devices. Complete necessary Army Maintenance Management System (TAMMS), calibration, radiation reports and other records and forms on work completed. Furnish technical data to the supervisor for inclusion in reports as well as recommending equipment improvement and solutions for unusual problems related to testing and the use of precision TMDE. Perform and interpret wipe tests on radiation sources for possibility of radiation hazards. Perform other duties as assigned.

Qualifications

Each applicant must fully substantiate (in her/his own words) that they meet the requirements of the specialized experience listed below; otherwise, the applicant will be considered unqualified for this vacancy. DO NOT COPY THE VACANCY ANNOUNCEMENT OR THE POSITION DESCRIPTION. IF YOU DO THIS YOU WILL BE CONSIDERED UNQUALIFIED FOR THE VACANCY. Please ensure that you have included beginning and ending dates (month and year) for all jobs listed on your resume. Military Grades: E1-E9 & WO1-CW2 Compatible Military Assignments: ECMF: 14, 25, 29, or 94 EMOS: 35T, 91F, 91G, 91X, or 91Z WOBR: 14, 25, 91, or 94 General Experience: Must possess experience which demonstrates a working knowledge of electronic principles involved in the generation and measurement of such elements as voltage, current, impedance, capacitance, frequency, and inductance. Experience in the use of various precision measurement instruments and standards. Specialized Experience: Candidate must have 36 months specialized experience with basic application of operating principles such as the production and utilization of oscillations over a broad range of frequencies; signal and waveform behavior, distortion, and amplification; pulse, trigger, and synchronization techniques; digital/analog processing and data conversion techniques; and a variety of display and indication methods. Experience in tracing signals and voltage paths, and skilled in the analysis of waveform characteristics such as timing, duration, frequency, and phasing. Originates test set-ups to isolate malfunctions and check performance characteristics of special or unique test panels or mockups. Experience in interpreting and applying a variety of technical electronic information such as schematic symbols, mathematical expressions and formulas, calibration procedures, and other reference materials. Experience in applying established techniques and methods of repair, testing, alignment, and calibration of equipment, which serves as test equipment or precision measurement standards. Experience in utilizing electronic circuits to measure electronic or electrical quantities to determine the performance characteristics and accuracy of other instruments and equipment.

How to apply

To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link:https://apply.usastaffing.gov/ViewQuestionnaire/13053666 A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application. Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process. After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process. You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.