MECHANICAL ENGINEER

Summary

You will serve as a MECHANICAL ENGINEER in the Planning, Design, and Construction (PDC) Branch, Resident Officer in Charge of Construction (ROICC) Newport of NAVFAC ENGINEERING CMD MID-ATLANTIC.

Duties

• You will complete complex in-house engineering design packages (i.e. construction drawings, technical specifications, design-build (DB) Requests for Proposals (RFPs), and comprehensive mechanical/plumbing plans for military construction projects).
• You will manage/review technical submittals, construction documents, and design calculations to ensure strict compliance with Unified Facilities Criteria (UFC), safety regulations, and Navy design standards.
• You will serve as the technical lead and project manager for the engineering phases of both Design-Build (DB) and Design-Bid-Build (DBB) acquisition paths, coordinating multi-discipline design efforts from conceptual planning through final award.
• You will function as the senior technical authority in facility mechanical engineering disciplines, providing engineering guidance.
• You will perform and review highly complex engineering analyses, including heating and cooling load calculations, heat and mass transfer, fluid flow (duct and pipe sizing), piping thermal flexibility, and piping stress/support analyses.
• You will provide critical engineering support (i.e. conducting on-site inspections, resolving complex field troubleshooting issues, reviewing material submittals, and overseeing system testing, adjusting, and balancing (TAB)).
• You will coordinate mechanical requirements with other engineering disciplines (electrical, structural, civil) and collaborate with key stakeholders, including Base Public Works, FEAD/ROICC, and other representative technical authorities.
• You will mentor and provide technical direction to other mechanical engineers and mechanical engineering technicians within the department, ensuring consistent application of quality assurance protocols across all engineering deliverables

Qualifications

Selective Placement Factor (SPF): This position has an SPF which is current registration as a Professional Engineer (PE) in any state, the District of Columbia, Guam or Puerto Rico. Do you meet this requirement? Note - if you respond "YES", you must provide a copy of your current registration with your application. The registration must show the date of currency or additional documentation must be provided from the registration agency showing the dates the registration is current. A copy of a wall certificate that does not show current registration status will not serve to verify you meet this requirement. In addition to the Basic Requirements for this position, your resume must also demonstrate at least one year of SPECIALIZED experience at or equivalent to the GS-12 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: 1) Providing technical reviews of facilities construction drawings and specifications for mechanical adequacy, compliance with functional requirements, and conformity with standard engineering and construction practices; 2) Designing and developing layouts, construction drawings and specifications for facility mechanical systems such as heating, ventilating, and air-conditioning (HVAC), plumbing, utilities, fuel handling, and industrial ventilation; 3) Performing engineering services in support of Architectural and Engineering Contracts such as writing statements of work, estimating fees, negotiation, performance monitoring, and evaluation of bids. NOTE: This information must be supported in your resume to be considered for the position. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series and https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/mechanical-engineering-series-0830/ https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Applicants must meet the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Applicants must possess Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position. OR Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org OR Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html. OR Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)ORSuccessful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

How to apply

Please read the entire announcement and all the instructions before you begin an application. To apply and be considered for this position, you must complete all required questionnaires, assessments, and required documentation as specified in the How to Apply and Required Documents section. Resumes are restricted to no more than 2 pages. Illegible/unreadable resumes will not be considered. The complete application package must be submitted by 11:59 PM (ET) on the closing date of the announcement to receive consideration. The application process is as follows: 1. Click the Apply Online button. 2. Answer the questions presented in the application and attach all necessary supporting documentation. 3. Click the Submit Application button prior to 11:59 PM (ET) on the announcement closing date. 4. If you are required to complete any USA Hire Assessments, you will be notified after submitting your application. The notification will be provided in your application submission screen and via email. The notification will include your unique assessment access link to the USA Hire system and the completion deadline. Additionally, in USAJOBS you can click "Track this application" to return to your assessment completion notice. 5. Access USA Hire using your unique assessment link. Access is granted through your USAJOBS login credentials. 6. Review all instructions prior to beginning your assessments. You will have the opportunity to request a testing accommodation before beginning the assessments should you have a disability covered under the Rehabilitation Act of 1973 as amended. 7. Set aside at least 2 hours to take the USA Hire assessments; however, most applicants complete the assessments in less time. If you need to stop the assessments and continue later, you can re-use your unique assessment link. 8. Your responses to the USA Hire Assessments will be reused for one year (in most cases) from the date you complete an assessment. If future applications you submit require completion of the same assessments, your responses will be automatically reused. Reasonable Accommodation (RA) Requests: If you believe you have a disability (i.e., physical or mental), covered by the Rehabilitation Act of 1973 as amended, that would interfere with completing the USA Hire Competency Based Assessments, you will be granted the opportunity to request a RA in your online application. Requests for RA for the USA Hire Competency Based Assessments and appropriate supporting documentation for RA must be received prior to starting the USA Hire Competency Based Assessments. Decisions on requests for RA are made on a case-by-case basis. If you meet the minimum qualifications of the position, after notification of the adjudication of your request, you will receive an email invitation to complete the USA Hire Competency Based Assessments. You must complete all assessments within 48 hours of receiving the URL to access the USA Hire Competency Based Assessments if you received the link after the close of the announcement. To determine if you need a RA, please review the Procedures for Requesting a Reasonable Accommodation for Online Assessments here: https://appsupport.usastaffing.gov/hc/en-us/sections/28980686389652-Reasonable-Accommodation-Information For more general information, system requirements, and to request assistance regarding the USA Hire Assessments, review the following resources: https://support-usahire.opm.gov/hc/en-us To update your application, including supporting documentation: During the announcement open period, return to your USAJOBS account, find your application record, and click Edit my application. This option will no longer be available once the announcement has closed. To view the announcement status or your application status: Click on this: https://help.usajobs.gov/how-to/application/status. Your application status page is where you can view your application status, USA Hire assessment completion status, and review your notifications sent by the hiring agency regarding your application.